Fault Finding
12
This section provides an easy reference guide to more common problems that may occur during operation of your
appliance. The fault finding guide in this section is intended to help you correct, or at least accurately diagnose
problems with your equipment.
Although this section covers most common problems reported, you may encounter a problem not covered in this
section. In such instances, please contact your local authorised service agent who will make every effort to help you
identify and resolve the problem. Please note that the service agent will require the following information:-
Model Code and Serial Number of appliance. (Both can be found on the Rating Plate located on the
appliance).
NOTE: Components having adjustments protected (e.g. paint sealed) by the manufacturer, are only to be
adjusted by an authorised service agent. They are not to be adjusted by an unauthorised service
person.
Fault
Possible Cause
Remedy
COOKTOP BURNERS
Main burner will not light.
Incorrect supply pressure.
Check supply pressure at manifold test
point.
Call service provider.
Blocked Injector.
Remove and clean injector.
Call service provider.
Faulty gas control.
Replace gas control.
Call service provider.
Main burner will not stay alight.
Faulty thermocouple connection.
Check thermocouple connection.
Call service provider.
Thermocouple incorrectly located.
Re-position thermocouple.
Call service provider.
Main burner goes out when turned
to ‘Low’ position.
Blockage in gas valve.
Clean and re-grease the gas valve.
Call service provider.
Irregular flame.
Burner head not located correctly on
burner base.
Re-locate burner head onto burner
base.
Low gas pressure.
Check pressure at manifold test point.
Call service provider.
OVEN BURNER
Oven burner will not light.
Accumulation of dirt and grease
around the burner ports.
Remove the burner and clean.
Piezo ignition lead broken or
disconnected.
Replace / re-connect lead.
Call service provider.
Faulty thermostat.
Replace thermostat.
Call service provider.
Blocked injector.
Remove and clean injector.
Call service provider.
Oven too hot - too cold.
Faulty thermostat.
Replace thermostat.
Call service provider.
Oven burner will not stay alight.
Loose thermocouple or thermocouple
incorrectly positioned.
Re-position and tighten thermocouple.
Call service provider.
Oven burner goes out during use.
Blocked bypass screw.
Remove and clean bypass screw.
Call service provider.
Summary of Contents for G750-6
Page 6: ...Dimensions 4 G750 6 ...
Page 20: ......
