Blue Seal G750-6, Installation And Operation Manual

Page: 13 / 20

Cleaning and Maintenance
11
Oven Interior Cleaning
1. Do not use wire brushes, steel wool or other
abrasive materials to clean oven interior.
2. Clean the oven regularly while the oven is warm but
not hot.
3. The oven side runners and base plate can be
removed for cleaning. These can be washed in a
hot detergent solution, rinsed and dried before re-
placing.
4. Clean the oven interior and oven door daily with a
hot detergent solution. Rinse with clean water and
dry thoroughly.
5. Stubborn stains can be removed by soaking in a
detergent solution and gently scraping.
6. Dry the oven thoroughly with a dry cloth and polish
with a soft dry cloth.
Stainless Steel Surfaces
NOTE: Do not use cleaning agents containing
bleach, abrasives or caustic chemicals as
these will stain and damage the stainless
steel surfaces.
1. Clean stainless steel surfaces with hot soapy water
and a soft bristled brush.
2. Baked on deposits or discolouration, use a good
quality stainless steel cleaner or stainless steel wool.
Always rub in direction of grain.
3. Dry and polish all surfaces with a soft dry cloth.
Vitreous Enamel Surfaces
NOTE: Only use recommended cleaning products.
1. Wipe vitreous enamel surfaces daily after use, with a
soft cloth and hot soapy water whilst the surfaces
are still warm.
2. Baked on deposits can be removed by soaking in hot
soapy water with an approved detergent and
cleaning with a moistened nylon or scotch cleaning
pad.
3. Dry and polish all enamel surfaces with a soft dry
cloth.
Open Burner Cleaning
Open Burner cleaning should be carried out daily.
1. Lift off pot stands, burner heads, burner bases and
spill tray.
2. Wash with hot soapy water, using a soft bristled
brush ensuring all burner ports are clean and free of
debris.
3. Ensure all burner ports are clean and free from food
or cleaning material debris. Stubborn debris can be
removed using a non metallic implement such as a
cocktail stick. Blow through burner ports to ensure
there are no blockages.
4. The slots in the base of the burner head should be
kept clean and free of debris. Clean using a soft
bristled brush.
5. Wash hob spill tray with hot soapy water and a soft
cloth or soft bristled brush.
6. Dry all parts thoroughly with a lint free cloth before
fitting and re-assemble to the hob top.