Blue Seal Blue Seal G1100, Owner'S Manual

Page: 15 / 25

FAULT POSSIBLE CAUSE REMEDY
THE OVEN DOES NOT
OPERATE / START
The mains isolating switch on the
wall, circuit breaker or fuses are
“off” at the power board.
The power switch on the oven is
off. Turn on.
Turn on switch. Power indicator
will illuminate.
NO HEAT / BURNER NOT
WORKING Gas supply not turned on.
Incorrect gas pressure setting for
burner.
Burner ignition spark faulty.
Burner flame not being sensed.
Ignition / burner control box faulty.
Gas valve faulty.
Turn on gas supply
Set correct pressure.
Refer service section.
Refer service section.
Replace.
Replace.
FAN DOESN’T OPERATE Thermostat not on.
(Fan only operates when the
thermostat is on).
Door not closed.
(Fan only operates when the
door is closed).
Door microswitch out of
adjustment.
Turn thermostat on.
Close door.
Adjust microswitch.
OVEN LIGHT NOT
ILLUMINATING Blown bulb. Replace.
NO WATER INJECTION / STEAM Water not turned on.
Oven water nozzle blocked.
Turn water on at water supply.
Remove, clean or replace.
SLOW RECOVERY Oven in ‘Roast ‘n Hold’ mode.
Overloading of oven.
Fan not working. Switch off ‘Roast ‘n Hold’.
Reduce oven loading.
Check fan operation.
DOORS DO NOT CLOSE Tray in way of door.
Door catch setting incorrect.
Door chain setting incorrect. Correctly position tray in rack.
Adjust.
Adjust.
FAULT DIAGNOSIS
-11-