Cylinder lock
Figure 12: Push the cylinder lock downward
until you hear a click sound.
Figure 13: The lower part will come off
easily and automatically.
11.2. Reassemble Lower Part
Always remember to press
RESET
button after you disassemble
the lower part of the pipette.
Follow these steps to reassemble lower part of the pipette:
1. Press the
START
button or any button of the keypad to make the
step motor shaft retract inside of upper part for 1 cm. The step
motor will automatically retract inside of upper lower part if users
do not touch any button for 10 minutes.
2. Connect the lower part with connecting nut. Tighten up the
connecting nut.
3. Press the
button. The step motor shaft will connect with
the piston of the lower part automatically. After the connection is
completed, the pipette will beep twice.
!
RESET
24