6
Ranges must be installed in accordance with:
In the United States of America:
1.
State and local codes.
2.
National Fuel Gas Code, ANSI/Z223.1
(latest edition). Copies may be obtained from The American Gas Association, Inc.,
1515 Wilson Blvd., Arlington, VA22209.
In Canada:
1.
Local codes.
2.
CSA B149.1 Natural Gas and Propane Installation Code.
3.
CSA C22.1 Canadian Electric Code.
4.
CSA C22.2 Canadian Electric Code.
The above are available from the Canadian Standard Association, 5060 Spectrum Way, Suite
100, Mississauga, Ontario, Canada L4W 5N6.
ASSEMBLY: Ranges Mounted on Casters
Ranges mounted on casters must use a flexible connector (not supplied by CHEF
N
’
SAVE) that complies with the Standard for Connectors for Movable Gas Appliances,
ANSI-Z21.69 • CSA 6.16 and a quick-disconnect device that complies with the Standard
for Quick-Disconnect Devices for Use With Gas Fuel, ANSI-Z21.41 • CSA 6.9. In
addition, adequate means must be provided to limit movement of the appliance without
depending on the connector and the quick-disconnect device or its associated piping to
limit appliance movement. Attach the restraining device at the rear of the range as shown
in Fig. 1.
Remove two screws from the rear of the range and install the tie-down strap shipped with
the casters using these screws (Fig. 1). Attach the gas line strain relief to the tie-down
strap at the rear of the range (Fig. 1).
If disconnection of the restraint is necessary, turn off the gas supply before disconnection.
