Disconnecting Attachment From The Skid
Steer
Relieve auxiliary hydraulic pressure. (See the
machine’s Operator’s Manual for correct
procedure.)
Park the machine and attachment on a flat level
surface. Lower the attachment flat on the ground.
Leave the operator’s position. See “Leaving The
Operator’s Position” on page 19.
Disconnect attachment hydraulic hoses from the
machine.
Disengage locking pins / wedges. (See the
machine’s Operator’s Manual for correct
procedure.)
Enter the operator’s position. See “Entering The
Operator’s Position” on page 19.
Slowly tilt the machine’s mounting plate forward
until the attachment mounting frame is free from
the machine’s mounting plate.
Drive the machine slowly backward, away from
the attachment.
Blue Diamond® Attachments
13
