Attachment Inspection
Daily Inspection
NOTE:
Inspect the attachment by performing a
walk around daily before and after use.
Use the following inspection checklist as a
guideline.
Check the following items every 10 hours of
operation:
•
Verify that the
HD series 2 power rake
is properly
connected to the machine.
•
Check that all shields and guards are in place.
•
Check hydraulic lines, connections and fittings
for hydraulic oil leaks. Repair or replace
damaged parts if necessary.
•
Check the
HD series 2 power rake
mounting
hardware
for wear or damage. Inspect the
pins and
mount (on the attachment) for wear
or damage.
Repair or replace damaged parts if
necessary.
•
Check for debris build up between rotor and
frame. Remove any debris.
•
Check that the rotor turns freely.
Weekly Inspection
Check the following items every 40 hours of
operation:
•
Check rotor and rotor teeth for wear or
damage.
•
Check all bolts for tightness.
•
Inspect the
HD series 2 power rake
frame
for cracks,
bends, or damage.
•
Check and adjust hitch to frame pivot point as
needed. As wear occurs you may have to
tighten up the nut to compensate for wear. Do
not overtighten.
Monthly Inspection
•
Check the chain case oil.
•
Check chain tension.
•
Check the drive chain tension.
•
Check skid plates for wear.
•
Check that all bolts are tight.
•
Check rotor housing and rotor teeth for cracks
or damage. Replace if necessary.
•
Check mounting plate hardware or three-point
mounts.
•
Check
HD series 2 power rake
frame, shields,
guards.
Repair if damaged or replace if
necessary.
•
Check for damaged or missing decals.
Replace if necessary.
•
Check for damaged or leaking hydraulic hoses
or fittings. Replace if necessary.
•
Lubricate as required.
•
Check the PTO driveline for wear or damage.
WARNING
AVOID SERIOUS INJURY OR DEATH
Before servicing the attachment:
•
Always park on a flat level surface.
•
Lower the attachment and place
attachment flat on the ground.
•
Place all controls in NEUTRAL.
•
Engage the park brake.
•
Wait for all moving parts to stop.
•
Stop the engine and remove the key.
SEE MACHINE’S OPERATOR’S MANUAL
FOR ADDITIONAL INFORMATION.
Blue Diamond® Attachments
10
