Blue Coat ProxySG SG900-10, Maintenance And Upgrade Manual

Page: 97 / 104

ProxySG 900 Series Maintenance & Upgrade Guide 97
Slide Rail Kit
2. Attach the Rail_A to the Rail_B mounting brackets.
a. Fit Rail_A into both Rail_B tracks. Move Rail_A fore or aft to the nearest set of
mounting points to properly fit your mid mount requirements and attach using (1)
M3 screw. Use one of the Rail_B single hole mounting points. This will prevent
alignment issues when attaching the opposite slide-rail.
b. Secure Rail_A to the Rail_B mounting brackets using M3 screws. You can use any of
the points that are available on the slotted holes. Be sure to use at least a total of (4)
screws per side.

Note: The above image illustrates one of many possible configurations. The placement of
additional mounting points along Rail_A allows it to be placed in a variety of locations.
Next: “Install the Appliance into the Equipment Rack” on page 100