Blue Coat ProxySG SG900-10 Maintenance And Upgrade Manual Download Page 78

Page: 78 / 104

ProxySG 900 Series Maintenance & Upgrade Guide

LAN Option Card

Reinstall the PCI riser card into the chassis.

Align the connectors on the riser card with those on the system board and gently
press down until fully seated.

Lock the PCI riser card into place by pressing down on the blue release clips while
pressing down into the chassis.

Reinstall the appliance rear and center panels.

Reinstall the appliance cabling.

Reconnect the network cabling as necessary for your deployment.

Reconnect the power cords.

Verify that you have correctly installed the option card by

“Verifying Option Card

Installation” on page 79

Summary of Contents for ProxySG SG900-10









































































































Search results

Summary of Contents for ProxySG SG900-10

Reviews:

Related manuals for ProxySG SG900-10

Brands by name

Popular brands

Blue Coat ProxySG SG900-10, Maintenance And Upgrade Manual

Search results

Summary of Contents for ProxySG SG900-10

Reviews:

Related manuals for ProxySG SG900-10

Brands by name

Popular brands