About This Guide
24
ProxySG 900 Series Maintenance & Upgrade Guide
Upgrading from the SG900-30 to a SG900-55
Follow the listed steps to upgrade the SG900-30 to a SG900-55.
Upgrade
Steps
Description
1
Upgrade to a qualified SGOS 6.2.7.2 or later release. For the minimum supported release, see:
https://kbint.bluecoat.com/index?page=content&id=FAQ1153
See the
SGOS 6.2.x Upgrade/Downgrade Guide
for instructions on upgrading SGOS.
2
Archive the configuration and keyring that are running on the appliance and record your network
configuration settings.
See ‘Chapter 5: Backing Up the Configuration’ of the
SGOS Administration Guide
for additional instructions.
3
Power down the appliance. See the
ProxySG 900 Series Quick Start Guide
for additional information.
4
Replace all existing HDDs.
See, “Hard Disk Drive” on page 35.
5
Replace existing memory modules.
See, “Memory Module” on page 47.
6
Replace the existing CPU and heatsink unit.
See, “Processor (CPU)” on page 57.
7
Power on the appliance. See the
ProxySG 900 Series Quick Start Guide
for additional information.
8
Restore the archived keyring and configuration onto the upgraded appliance.
See ‘Chapter 5: Backing Up the Configuration’ of the
SGOS Administration Guide
for detailed information on
this procedure.
9
Install new license keys.
See ‘Chapter 3: Licensing’ of the SGOS Admininstration Guide for additional instructions.
Summary of Contents for ProxySG SG900-10
