INSTRUCTIONS FOR THE USE OF THE BRUSH-CUTTER
A
B
1.6
Machine guards and safety systems
Before starting the machine, remember that it is provided with the following set of “safety devices” for your protection:
•
Adequate safety guards that provide protection against accidental contact with the machine’s heated surfaces.
•
Spark-plug cover in nylon or rubber that provides protection against accidental contact with the machine’s high-
voltage electrical parts.
•
Rod-engine connection case equipped with vibration damping rubber.
•
Vibration-damping provided on grip or handle-bar cross.
•
Amply-sized safety guards and protection barriers.
•
Safety belts in non-inflammable material equipped with quick-snap release buckles to immediately discard the
machines
•
Gas control knob lever with double safety.
Description of safety parts (Fig. 1):
A)
Safety helmet
B)
Head-phones
C)
Chip-guard face-mask
D)
Quick-release safety belt
E)
Gloves
F)
Safety guard
G)
Safety shoes
H)
Heavy-duty work suit
I)
Vibration-damping support
L)
Accelerator knob with “STOP” switch
M)
Engine with overheating protection
C
D
M
E
I
L
F
H
G
Fig. 1
1.7 Inappropriate use and contraindications
The unit must be used for the purposes of use foreseen by the manufacturer, and it is forbidden to use the unit in the
following cases:
•
Without the indicated protective guards (see par. 1.3) and/or with the safety trigger disassembled, broken or
missing (see par. 1.5),
•
Setting up of the earth auger in discordance with the indications of the manual,
•
in areas with risks of explosion or in places where there exists the risk of fires,for operating the unit on materials
different from those advised be the manufacturer,
•
in conditions of dangerousness or malfunctioning of the machine,
•
for improper use of the machine or when used by untrained personnel,
•
for use contrary to the adopted regulations,
•
in case of defects / malfunctioning in the fuel feeding of the engine,
•
in case of lack of the regular maintenance,
•
after modifications or non-authorized operations,
•
partial or total failure to comply with the manual instructions,
•
use with materials and tools different from those indicated by the manufacturer.
GB - 4
Summary of Contents for BBH 2600
Page 39: ......
