Advanced Text Notification
QUICK START INSTRUCTIONS
The Professional’s Line
®
READ THIS MANUAL BEFORE USING THIS PRODUCT.
FAILURE TO FOLLOW THE INSTRUCTIONS AND
SAFETY PRECAUTIONS IN THIS MANUAL CAN
RESULT IN SERIOUS INJURY OR DEATH. KEEP THIS
MANUAL FOR FUTURE REFERENCE.
PUSH TO TEST
Advanced Text
Notification
The Professional’s Line
1
2
3
4
1. Advanced Text Notification
Cellular Device
2. Dual float water sensor with
hose clamp
3. Four (4) mounting straps
4. A/C power adapter
For parts, product & service information
www.blueangelpumps.com/AdvancedText
© 2013, Blue Angel
Pumps, Harrison Ohio.
354200-002 6/13
Unit ID and Promo Code:
Unit ID
(mfr puts sticker here)
Figure A
INSTALLATION TOOLS NEEDED
1. Safety glasses
2. Phillips head screwdriver
3. Flat head screwdriver
4. Scissors or wire snips
5. Four (4) AAA Batteries
DESCRIPTION
Thank you for your purchase. This
device includes a dual float sensor that
installs in your sump pit, a control unit
that attaches to the discharge pipe
above the pit, and a power cord. When
the device detects a power outage
or high water condition, a LED light
flashes, an audible alarm sounds, and
the device will send a text message
alert to (up to) three mobile phone
numbers that you have programmed.
This device operates on AC power
and requires four (4) AAA batteries (not
included). There is a small monthly fee
for the texting service.
QUICK START INSTRUCTIONS BCPA1
0
For detailed instructions go to page 3.
STEP 1 - VERIFY PACKAGE
CONTENTS
STEP 3 - ONLINE ACTIVATION
For detailed instructions go to page 4.
For detailed instructions go to page
4. Record device phone number (from
activation email) below:
STEP 4 - EMAIL
CONFIRMATION
For detailed instructions go to page 4.
STEP 5 - SAVE DEVICE
NUMBER AS A CONTACT
STEP 6 - INSTALLATION
For detailed instructions go to page 4.
Record your (3) emergency contact
cell phone numbers (with texting
capability) you enter into the device.
Phone1
Phone2
Phone3
STEP 8 -TEST DEVICE
For detailed instructions go to page 5.
STEP 7 - ENTER EMERGENCY
CONTACTS
STEP 2
a. SIGNAL STRENGTH
b. INSTALL BATTERIES
c. NETWORK CONNECTION
