BLU-JET COULTERPRO Series, Assembly And Operators Manual

Page: 146 / 150

144
(Assembly) Optional Rolling Harrow
NOTE:
Consult
row
spacing
pages
for required
brackets
and
locations
Task Procedures Illustrations
Mounting
Harrow
brackets
1. Consult row spacing pages
for required offset brackets
and locations.
2. Mount (a) offset bracket on
frame rear with (b) (BP3407)
3/4” x 4”W x 7-3/4”L u-bolts.
Secure with (c) (BP3035) 3/4”
lock washers and (d)
(BP3034) 3/4” hex nuts.
3. Mount (e) (AM5124) harrow
mount on (a) with (b)
(BP3407) 3/4” x 4”W x 7-3/4”L
u-bolts Secure with (c) (BP3035)
3/4” lock washers and (d)
(BP3034) 3/4” hex nuts.
4. Attach (f) (AM5168) torsion
spring harrow linkage to
harrow mount with (h) (BM3465)
1-1/4” x 7-3/4” pin. Insert (g)
(BP3249) 1-7/8” OD x 1-1/4” ID,
14 GA machinery bushings as
pin is inserted.
Secure pin with (i) (BP 3096)
3/8” x 2-1/2” hex cap screw and
(j) (CP2660) 3/8” hex lock nut.
c
BP3035
d
BP3034
a
b
BP3407
c
BP3035
d
BP3034
a
b
BP3407
e
AM5124
i
BP3096
h
BM3465
f
AM5168
e
AM5124
j
CP2660
g
BP3249