BLU-JET COULTERPRO Series Assembly And Operators Manual Download

Page: 108 / 150

106

Task

Procedures

Illustrations

1. Consult row spacing pages

and mark bracket locations.

2. Mounting

(a) (AM4772)

4 x 6

flatback, centered and

(b)

(AM4779)

4 x 6 flatback, offset

to frame.

3. Place

(c) (BP3331)

5/8 x 4”W x

7-3/4”L u-bolts over tube and

install flatback. Center coulter

shank slot on the bracket with

mark.

Secure with

(d) (BP3039)

5/8” lock washers and

(e)

(BP3038)

5/8” hex nuts.

4. Insert

(f) (BP3229)

1/2” x 2-1/2”

carriage bolts into bracket.

Place

(g) (BP3043)

1/2” lock

washers and

(h) (BP3042)

1/2”

hex nuts on each bolt.

Do not

tighten until coulter shank is

installed.

Mounting

coulter

flatbacks

Assembly (Mounting Flatbacks)

BP3331

BP3229

BP3043

BP3042

BP3043

BP3042

AM4772

BP3039

BP3038

AM4779

BP3229

BP3038

BP3039

Summary of Contents for COULTERPRO Series























































































































































Search results

Summary of Contents for COULTERPRO Series

Reviews:

Related manuals for COULTERPRO Series

Brands by name

Popular brands

BLU-JET COULTERPRO Series, Assembly And Operators Manual

Search results

Summary of Contents for COULTERPRO Series

Reviews:

Related manuals for COULTERPRO Series

Brands by name

Popular brands