CLEANING INSTRUCTIONS (continued)
PROCEDURE: Clean Product Canisters
PRECAUTIONS: None
FREQUENCY: Monthly
TOOLS: Mild Detergent, Clean Soft Cloth or Sponge
Soft Bristle Brush, Bottle Brush
1. Remove CANISTERS from dispenser.
2.
Remove CANISTER LIDS and empty all product from
CANISTERS.
3. Disassemble AUGER from canister.
NOTE: While the AGITATOR wheel and spring assembly
may
be removed from the canister, Bloomfield recommends
that it be removed
only
if necessary for repair
.
4. Wash canister components in warm water with mild
detergent. Use appropriate soft brushes to clean caked-on
product.
5. Rinse canister components with clear water. Drain
thoroughly and allow to air dry.
6. Reassemble CANISTERS.
7. Install POWDER DISPENSE ELBOWS on canisters.
Fill PRODUCT CANISTERS with the appropriate product.
Left hopper - Regular Coffee
Right hopper - Decaf Coffee
Reinstall CANISTERS LIDS
8. Install PRODUCT CANISTERS on the CANISTER SHELF.
The AUGER DRIVE must engage the AUGER COUPLING.
Procedure is complete
CAUTION
BURN HAZARD
Brewing and serving
temperatures of coffee are
extremely hot.
Hot coffee will cause
serious skin burns.
IMPORTANT:
DO NOT use steel wool, sharp
objects, or caustic, abrasive or
chlorinated cleansers to clean
the dispenser or components.
IMPORTANT:
Left and right canisters use
identical internal components.
Use care to reassemble
components in the proper order
and position so that "COFFEE"
mounts to the left and "DECAF"
mounts to the right.
10
