background image

WARRANTY STATEMENT

All equipment manufactured by Bloomfield is warranted against defects 

in materials and workmanship for the time periods listed in the chart  

starting from the date the equipment is placed into service and is for the 

benefit of the original purchaser:

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN LIEU 

OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED,  

INCLUDING  ANY IMPLIED WARRANTY OF MERCHANTABILITY 

OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE 

HEREBY EXCLUDED.  
BLOOMFIELD, LLC SHALL NOT BE LIABLE FOR  INDIRECT, 

INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES 

FROM ANY CAUSE WHATSOEVER.
This warranty is void if it is determined that upon inspection by an 

authorized service agency that the equipment has been modified, 

misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God.

It also does not apply if the serial nameplate has been removed or unauthorized service personnel perform service.  The prices 

charged by Bloomfield for its products are based upon the limitations in this warranty.  Seller’s obligation under this warranty 

is limited to the repair of defects without charge by a Bloomfield Authorized Service Agency or one of its sub-agencies.  This 

service will be provided on customer’s premises for non-portable models.  Portable models (a device with a cord and plug or a 

dispenser) must be taken or shipped to the closest authorized service agency, transportation charges prepaid, for services.

Agencies are located in principal cities, please visit our website to locate one.

This warranty is valid in the United States and Canada and void elsewhere.  Please consult your classified telephone directory 

or your food service equipment dealer; or, for information and other details concerning warranty, write to:

Service Parts Department; Bloomfield

10 Sunnen Drive, St. Louis, MO 63143

  Phone:  (314) 678-6336 : Fax: (314) 781-2714 

Technical@ bloomfieldworldwide.com / www.bloomfieldworldwide.com

BLOOMFIELD SERVICE POLICY AND PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS

1.  Resetting of safety thermostats, circuit breakers, overload protectors, or fuse replacements.

2.  All problems due to operation at voltages other than specified on equipment nameplates - conversion to correct voltage 

must be the customer’s responsibility.

3.  All problems due to electrical connections not made in accordance with electrical code  requirements and wiring diagrams 

supplied with the equipment.

4.  Replacement of items subject to normal wear, to include such items as knobs and light bulbs.  Normal maintenance 

functions including adjustment of thermostats, microswitches, and replacement of fuses and indicating lights are not 

covered under warranty.

5.  All problems due to inadequate water supply, such as fluctuating, or high or low water pressure.

6.  All problems due to mineral/calcium deposits, or contamination from chlorides/chlorines. De-liming is considered a 

preventative maintenance function and is not covered by warranty.

7.  Full use, care and manuals may or may not be sent with each unit, only a condensed version. Please visit our web site to 

download the full version.  

8.  Travel  mileage is limited to fifty (50) miles from an authorized service agency or one of its sub-service agencies.

9.   All labor shall be performed during normal working hours.  Overtime premium shall be charged to the customer.

10. All genuine Bloomfield replacement parts are warranted for ninety (90) days from date of purchase on non- warranted 

equipment.  

Any use of non-genuine Bloomfield parts completely voids any warranty.

11.  Installation, labor and job checkouts are not considered warranty.

12. Charges incurred by delays, waiting time or operating restrictions  that  hinder the service technicians ability to perform 

services  are not covered by warranty.  This includes institutional and correctional facilities.

SHIPPING DAMAGE CLAIMS PROCEDURE

NOTE

:  For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled 

personnel before leaving the factory.  Upon acceptance of this shipment, the transportation company assumes full responsibility 

for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1. 

VISIBLE LOSS OR DAMAGE: 

Be  certain  that  any visible  loss  or damage is noted on the freight bill or express receipt, 

and that the note of loss or damage is signed by the delivery person.

2. 

FILE CLAIM FOR DAMAGE IMMEDIATELY: 

Regardless of the extent of the damage.

3. 

CONCEALED LOSS OR DAMAGE:

 if damage is unnoticed until the merchandise is unpacked, notify the 

transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them.  This must be done 

within fifteen (15) days from the date the delivery was made to you.  Be sure to retain the container for inspection.

Bloomfield cannot assume liability for damage or loss incurred in transit.  We will, however, at your request, supply you with the 

necessary documents to support your claim.

Equipment

Parts

Labor

pour over, automatic coffee brewers

2 yrs.

2 yrs.

EBC, EMAX coffee brewers

2 yrs.*

2 yrs.

* EBC, EMAX coffee brewer control

3 yrs.

no labor

POD coffee brewers

1 yr.

1 yr.

ECO coffee brewers

1 yr.

1 yr.

coffee warmers

1 yr.

1 yr.

tea brewers

2 yrs.

2 yrs.

tea dispensers

1 yr.

1 yr.

tea dispenser BBTea

1 yr.

no labor

hot water machines

2 yrs.

2 yrs.

thermal servers

90 days

no labor

airpots

30 days

no labor

decanters

no warranty

no warranty

Summary of Contents for 2795TF





























Reviews: