PROCEDURE: Clean Thermals
PRECAUTIONS: Drain Thermal before Cleaning
FREQUENCY: Daily
TOOLS:
Sanitizer, Soft Clean Cloth, Bucket
1. Remove and drain thermals. Remove lids.
2. Remove funnel assembly and clean with mild detergent and
warm water.
3. Fill Server 1/4 to 1/2 full with hot water, (use a non-caustic
cleaning solution if appropriate).
4. Use a brush to clean the inside of the server.
5. Drain server, rinse & dry the outside surfaces with dry cloth.
6. Reinstall funnel assembly, lids & drip tray. Install satellites
on brewer.
7. Rinse servers: with an empty brew chamber in place, press
the BREW key and run 1 full cycle into each server.
8. Drain water from server.
Procedure is complete
CAUTION:
BURN HAZARD
Brewing and serving
temperatures of coffee
are extremely hot.
Hot coffee will cause
serious skin burns.
IMPORTANT:
DO NOT submerge thermals in
water.
IMPORTANT:
DO NOT use steel wool, sharp
objects, or caustic, abrasive or
chlorinated cleansers to clean
the servers.
11
CLEANING INSTRUCTIONS (continued)
655 2M-Z17970 Owners Manual E-Maxl Thermal Brewer
