8
EN
2� After around 10 minutes, the results from the Bloom Lab
will be transmitted to the Bloom App. The app will alert you
that the Bloom Ferritin Report is ready.
3� View the personalized Bloom Ferritin Report.
Information: If the Bloom App disconnects from the Bloom Lab
during the measurement process, the Bloom Lab completes the
measurement process and saves the results. If the same Bloom
App reconnects with the Bloom Lab before another measure-
ment is initiated, the saved measurement value will be sent
to the Bloom App and the Bloom Lab will subsequently delete
the measurement value and any unique identifier of the Bloom
App. After a 10-minute period other Bloom Apps will be able
to connect to the Bloom Lab and perform new tests, which will
automatically delete the previous results.
4.4. Device cleaning
Caution: Please use protective equipment, such as gloves, when
cleaning the surfaces of the Bloom Lab to avoid contamination.
After performing the Bloom Ferritin Test, please make sure to
leave a clean workspace. Thoroughly wipe all surfaces of the Bloom
Lab after every use with the provided disinfection cleaning wipe.
Please check gaps for stains and clean thoroughly when needed.
5. Storage
In order to avoid hazardous situations, the Bloom Ferritin Test
should be stored with care at all times, this includes:
• The recommended storage temperature b8°C and
+30°C (46°F and 86°F)
• A dry indoors environment without direct or excessive heat and
humidity below 80% (bathrooms not suitable)
• Out of reach for children to avoid injury through misuse of
components like lancets.
6. Troubleshooting
For further information about the Bloom Lab, Bloom App,
frequently asked questions and troubleshooting, please visit
www.bloomdiagnostics.com/faq
or report the error using your
Bloom App (Settings - Contact us).
7. Symbol information
CE Mark
Manufacturer
Use-by date
Consult instructions for use
Fragile, handle with care
Serial number
Keep dry
Keep away from sunlight
Sterilized using
irradiation
Do not use if package is
damaged
Single use
Batch number
Contains sufficient
material for one test
Contains sufficient material
for five tests
Catalog number
Recycling
80%
0%
Humidity exposure limit
<80%
30°C
8°C
Temperature exposure
limits b8°C and
+30°C (46°F and 86°F)
In vitro diagnostic
medical device
Authorized Representative
Importer
8. Contact information
For additional information regarding technical support and local
distributors, contact:
Bloom Diagnostics AG
Susenbergstrasse 185
8044 Zürich, Switzerland
www.bloomdiagnostics.com/contact
2797
Bloom Diagnostics GmbH
Börseplatz 6/2/19-20
1010 Vienna, Austria
