23
SDE-6S-ASI
User Manual
INPUTS:
SCTE-35:
Enabled or disable are the options here. If there is an SCTE-35 feed coming to the encoder either through
the contact closure feed or an audio channel this setting makes it happen.
Null Splice:
Allows splice information to be sent in the incoming stream.
Cue Detection Source:
Specifies the source of the SCTE 35 messaging. Selections are Audio's 1 to 6 and Contact
Closures (see page 9, SCTE-35 CC for details).
Use Avail Time:
Allows the incoming stream to determine the duration of the incoming ad to be spliced.
Avail Time (seconds):
This allows the user to specify the length of the ad to be spliced vs. allowing the incoming
stream to determine the ad length.
Start Trigger:
The start trigger can be set to support a specific ad insertion program. A "*" Indicates the start of a
splice. Please refer to the specific ad insertion program for the start bit information.
Stop Trigger:
The stop trigger can be set to support a specific ad insertion program. A "#" Indicates a stop or end
of a splice. Please refer to the specific ad insertion program for the start bit information.
Pre-roll (seconds):
User configurable time to set before the start of the ad to be played.
SCTE 35 PID:
Set the PID value of the outgoing SCTE 35 stream.
PROGRAMS:
Virtual Channel Number:
(3-1) This is set in the Main/TS Config screen. The Major Channel is 3 and the Minor
Channel is 1.
Virtual Channel Name (short name):
Indicates the short name for the channel. This set In the Main/TS Config
screen.
Encoded Video Channel:
Displays the video input assigned to the program number in Section 5.3.
Video Input Source:
Displays the video input assigned to the program number In Section 5.3.
Encoded Audio Program 1-4:
Any one of 16 audio programs can be used here. This is set in the Main/Audio screen.
SCTE 35:
Assigns SCTE #1 to #6 input configurations to a program number.
1
2
3
Remember to click on the SAVE button to apply the new values/configurations.
4
5
6
7
8
9
1
2
3
4
5
6
5
