9
FlexCoder
Instruction Manual
4.1 Accessing the Unit via a Web Browser
You must complete the steps described in Section 3 before proceeding as follows:
Open a web browser on your computer (Internet Explorer 7 or higher is recommended) and enter the following URL
address
(http://172.16.70.1)
.
The “Login” Screen (Figure 4.1) will appear.
Enter the following case-sensitive factory-default Username and Password, and click on the “Submit” button.
NOTE:
When logged in as Admin, the user has read and write permission. Only one Admin can be logged in at a time.
Username
=
Admin
(case-sensitive)
Password
=
pass
(case-sensitive)
When logged in as Guest, the user has read-only permission. Up to four Guests can be logged in simultaneously.
Username
=
Guest
(case-sensitive)
Password
=
pass
(case-sensitive)
Monitoring and configuration of the unit is achieved via a series of web pages as described in the Sections below.
The following read-only information is displayed in a “page header” – in blue color – on top of each web page:
ESN:
unit’s Serial number
Headend name:
a user-defined field to make identification easier
Temperature:
temperature of unit’s chipset.
Uptime:
time elapsed since last time the unit was turned on
Location:
a user-defined field to make identification easier
Section 4 – Configuring the Unit
1
2
Figure 4.1 - “Login” Screen
