5
Clearview
+
Quick Guide
Step 4: Basic Configuration (continued)
REMINDER
If the IP Address is changed, the procedure in Step 3
must be repeated using the new IP address in place
of the default IP address in order to re-access the control panel.
System Page - Full View
On this page, the user is able to set up the Video and Audio Pipeline settings, located on the right side.
The visual representation of the transcode pipeline on the left side is interactive. Clicking on a Transcode block displays the
corresponding settings in the “Video/Audio Pipeline Settings” table, located on the right side. The corresponding tab is also
highlighted for persistent indication of the Transcode pipeline settings currently being shown.
Step 5: Transcoder Configuration
Transcoders: Settings
The final information to setup within the unit is located in the “
Transcoders:
” > “
Settings
” tab.
Transcoders: Settings Page - Example
