Blonder tongue 6734, User Manual

Page: 7 / 16

7 NXG-SDI4 Module
User Manual
Section 3 – Module Status and General Management
3.1 “4Ch SDI Encode Module: Status” Tab
The “ 4Ch SDI Encode Module: Status ” tab (Figure 3.1a) displays the general health and module information at a glance. The
information is provided as a quick way to monitor the module or assist with troubleshooting issues that may arise.
Figure 3.1a - “4Ch SDI Encode Module: Status” Tab
1
3
8
5
11 10
2
4
9
7
In the section entitled “ Information ”, the following module-specific information is shown below:
Model Number:
Indicates the model number of the module installed.
Serial Number: Indicates the serial number of the module installed.
Software Version: Indicates the software version of the module. To update software, please see “ Section 5 - Firmware
Updates ”.
Front-end Version: Indicates the firmware version of the SDI input device. This may be updated during a normal software
update.
Slot Location: Indicates the slot location on the platform chassis where the module is currently installed into.
3
4
5
6
7
In the Encoder Device section, the following encoder-specific information is displayed:
Device: Indicates the encoders EC1 - EC4 displays information for each module encoder input. These will populate other
data once set up and enabled. When a numbered encoder is not available the row will display as empty.
8
Encoders:
Indicates a status for each module encoder input being monitored with the following message types:
• Encoding...: indicates the EC is actively encoding.
• Error: indicates that one or more errors have been detected. See the NXG System Log using the menu at the top.
9
In the section entitled “ Status ”, the following parameters about the module health are displayed:
Module Status: Indicates the current status of the module. Status Levels shown below:
Ok - No issues at the current time
Updating - an update is in-progress via the Master Controller's Firmware Update page.
Error - One or more errors have occurred. Check system log for more information on error(s).
Warnings - One or more warnings have been triggered. Check system log for more information.
Temperature: Indicates the temperature of the module.
1
2