Blonder tongue 6734, User Manual

Page: 10 / 16

10 NXG-SDI-4 Module
User Manual
4.2 “Encode: Settings” Screen
The “ Encode: Settings ” Tab (Figure 4.2) allows the user to configure each encoder (EC) and displays status information
about the input and output streams. A visual status of the pipeline is also shown on the left side. When hovering over an
encode block, the corresponding status table, to the right, highlights.
Figure 4.2 - “Encode: Settings” Screen
1
2
3
4
5
6
7
8
Remember to click on the “Apply” button to apply the new values/configurations.
Pipeline Control: Allows the user to “ Enable ” or “ Disable ” the encode.
Output Resolution: Sets the output video resolution. Options available for this model are “ 480i60 ”, “ 480p30 ”, “ 480p60 ”,
“
720p30
”, “
720p60
”, “
1080i60
”, “
1080p30
”, and “
1080p60
”.
Output Video Encoding Format: Sets the output video encoding format. Options available for this model are “ MPEG-2 ”,
“ H.264/AVC ”, and “ H.265/HEVC ”.
Output Video Bitrate:
Sets the output video bitrate in Mbps. Options available for this model are “
2.0
” to “
19.0
”,
incremented by “ 0.1 ” Mbps.
Output Audio Encoding Format: Sets the output audio encoding format. Options available for this model are “ Passthru ”,
“
AC3 (2.0)
”, “
AAC
”, and “
MP3
”.
Output Audio Bitrate: Sets the output audio bitrate. Options available for this model are “ 128Kbps ”, “ 192Kbps ”, and
“ 256Kbps ”.
Output Audio Gain: Sets the output audio gain. Options available for this model are “ Mute ” and a range between “ -7
(minimum) ” to “ +7 (maximum) ”.
Output Stream Name: The user may enter a name for the stream. If a name is omitted, a default naming formula will
be used SLOT_ECX:Y (eg. "2_EC1:1"). Up to 16 alphanumeric characters are allowed.
1
2
3
4
5
6
7
8
To begin configuration on a transcoder, click on a tab (on the right side) to open the “ Video/Audio Pipeline Settings ”, as
shown above. The configurable options are as follows: