![background image](http://html.mh-extra.com/html/blomberg/wmd24400w/wmd24400w_owners-manual_2774423022.webp)
22 / English
Front-Loading Automatic Washer-Dryer
Installation Instructions
Water Supply Connection
Your product comes with both cold and hot water connections.
Connect the blue marked cold water supply hose to the cold water
inlet valve/faucet and the red marked hot water intake hose to the
hot water inlet valve/faucet. Screw the connecting bolts by hand and
tighten the connection properly using a plier. Over tightening may
cause damage on bolted connection.
B
WARNING
•
Be sure that the water connection of this product is handled by a
qualified service technician or a plumber.
The product has two bolted ½’’ water supply hoses and ¾’’ female
hose connections that can be connected to ¾’’ hot and cold water
faucets.
B
WARNING
•
Be sure that there are rubber seals located on the hose
connections. These seals and adjustable bolts ensure a safe
connection without leaking. After the water connection is done,
turn on both water faucets slowly and completely to check any
water leaks.
•
Be sure that water supply hoses are not crushed and they have
no kinking, bulges or cuts before the water connection.