82 / English
Front-Loading Automatic Washer-Dryer
Troubleshooting
Problem
Reason
Solution
Too much foam
forms inside the
product. (**)
Not using HE detergent
* Use HE detergent.
Excessive amount of detergent
is used.
* Use only a sufficient amount
of detergent.
Detergent was stored under
improper conditions.
* Store detergent in a closed
and dry location. Do not
store in excessively hot
places.
Some meshed laundry such
as tulle may cause too much
foam because of their texture.
* Use smaller amounts of
detergent for this type of
item.
Detergent is put in the wrong
compartment.
*
Put the detergent in the
correct compartment.
Softener is being taken early
by the product.
* There may be problem in
the valves or detergent
dispenser. Call the
Authorized Service Agent.
Foam is
overflowing from
the detergent
drawer /
Machine is
completely full
of suds.
Not using HE detergent /
Using excessive amount of
detergent
*
Push “Start/Pause/Cancel”
button. Mix 2 cups of water
with 1-2 tablespoon of
fabric softener and pour it
into detergent dispenser.
Push “Start/Pause/
Cancel” button again.
Use proper amount of HE
detergent next time you
operate the washer.
* Use detergent suitable for
the programs and maximum
loads indicated in the
“Program and consumption
table”. When you use
additional chemicals (stain
removers, bleaches, etc.),
reduce the amount of
detergent.