background image

3

USA

result in respiratory problems, 

especially for the infirmed, elderly 

and children.

 

Chidren should not operate this 

machine without adult supervision.

 

Be Careful to not leave the door 

fully open when not being loaded 

or unloaded to prevent someone 

from tripping on the unit.

A

WARNING:

If your 

dishwasher is equipped with 

internal illumination, lamp 

should only be replaced by 

the Authorized Service Agent 

in case of failures that may 

occur on the lamp.

A

WARNING:

  This product 

can expose you to chemicals 

including Nickel (Metallic) 

which is known to the State 

of California to cause cancer. 

For more information go to 

www.P65Warnings.ca.gov

Note: Nickel is a component 

in all stainless steel 

and some other metal 

components. 

SAVE THESE INSTRUCTIONS

 

Service should be performed 

by a qualified installer. Work by 

unqualified persons could be 

dangerous and may void the 

warranty.

 

Do not operate the appliance if 

damaged, malfunctioning, partially 

disassembled or if it has missing 

or broken parts.

 

Before installation or service, 

disconnect the power supply to the 

work area by unplugging the unit, 

“tripping” the circuit breaker or 

removing the fuse.

 

For safety reasons, dishwasher 

must be secured to adjacent 

cabinetry using the brackets 

provided. Failure to do this may 

cause damage to property or 

bodily injury.

 

Do not use any extension cord or 

portable outlet device to connect 

the dishwasher to a power supply.

2. RECYCLING

 

Remove the door to the washing 

compartment when removing 

an old dishwasher from service 

or discarding it. Ensure that the 

appliance presents no danger to 

children while being stored for 

disposal.

 

Remove the door lock or door of 

the washing compartment before 

disposing dishwasher so that 

children or small animals can not 

trapped inside.

 

Old appliances may contain 

materials that can be recycled. 

Please contact your local recycling 

authority about the possibility of 

recycling these materials.

 

Please check the water supply 

line periodically. It is susceptible 

to breakage. It becomes less 

flexible as time goes by.Replace 

it immediately when it is torn, cut, 

swollen or there is water leakage.

 

Please keep the dishwasher 

package out of the reach of 

children after unpacking it.

A

WARNING:

Danger of 

suffocation! Ensure that 

any plastic wrappings, 

bags, small pieces etc. are 

disposed of safely and kept 

out of the reach of children.

Summary of Contents for DWS 51500 FBI1












































Reviews: