Blomberg 8978983800, Service Manual

Page: 54 / 70

BWOS 30100 SERVICE MANUAL
54
12. Run the Oven and check all functions.
7.6 UPPER ELEMENT SUBSTITUTION
1.Disconnect the power supply cord and remove the Oven from the cabinet.
2.Remove the rear covers.
3.Disconnect the terminals of heating element.
4.Remove the two screws near the external terminals, one of which is used for ground.
5.Remove the upper element by removing two screws on the brackets on top in the cavity.
6.Mount the new upper element with a new fiber gasket between the base of the element
and the back side of the Oven.
7.Connect the terminals. Pay attention to the sequence of wiring on the element
8.The connections must not be loose.
9.Reinstall the Oven into the cabinet.
10.Reconnect the power supply cord after the Oven is installed.
11.Run the Oven and check all functions.