Blomberg 8978983800, Service Manual, Page: 14 / 70

BWOS 30100 SERVICE MANUAL
14
2.6.3 Power supply 208v voltage selection
Wait for the clock appears and display “12:00”, then remember to verify if the power supply in
the house is 240v or 208v. 240v is selected by default, in case of 208v the control must be
properly configured:
Within 5 minutes from the power-up, hold [clock] and [timer] keys at the same time to enter
the user option menu. The display shows:
Sele deg
Hold then [timer] and [stop time] keys until the display gets completely dark then hold [cook
time] and [stop time] further, until the display shows:
Volt 240
Pressing [set clock] key again, edit mode is entered and red digits start blinking. Using [+] or
[-] keys, the control toggles between 240v and 208v options. Hold [set clock] to confirm the
selection.
Hold [timer] and [stop time] again until the display comes back to:
Sele deg
Hold [set clock] to quit from user option menu and come back to clock state.
The voltage setting is kept even after a long power-off.
2.7 DESCRIPTION OF ELECTRONIC CONTROL