Blohm + Voss Oil Tools GraySpin Mark 40, Technical Documentation Manual

Page: 27 / 64

MAI
N
TE
N
AN
C
E
&
IN
SP
EC
TI
O
N
27
Lubrication
The Mark 40 should be inspected and greased each week. For higher ambient temperature
up to 86° Fahrenheit (30° Celsius) we recommend to use NLGI grade 2.
Lubrication Chart
No Location Frequency Type Quantity
1 Bearing Caps Daily Grease
(4 locations) Do not over
grease and burst seals.
2
Pressure Roller
Shafts
Daily Grease
(2 locations) Do not over
grease and burst seals.
3
Cylinder Rod
Heads
Daily Grease (2 locations)
4 Pivot Arm Shaft Daily Grease (2 locations)
5 Arm at Clevis Pin Daily Grease (4 locations)
6 Chain (9G8000)
Weekly and
especially prior
to periods of
non-use.
Use a chain and
pin bushing aerosol
lubricant
7 Idler Sprocket Daily Grease
Do not over grease and
burst seals.
Start maintenance only when supply lines are disconnected and when all pressure has
been released. Oil refers to SAE 10 non-detergent oil. Grease refers to a lithium base,
extreme pressure, high temp, multi-purpose grease.