Blohm + Voss Oil Tools GraySpin Mark 40, Technical Documentation Manual

Page: 2 / 64

2
Warnings and Notes
WARNING: A “WARNING”
INDICATES A DEFINITE
RISK OF EQUIPMENT
DAMAGE OR DANGER TO
PERSONNEL. FAILURE TO
OBSERVE AND FOLLOW
PROPER PROCEDURES
COULD RESULT IN SERIOUS
OR FATAL INJURY TO
PERSONNEL, SIGNIFICANT
PROPERTY LOSS, OR
SIGNIFICANT EQUIPMENT
DAMAGE.
NOTE: A “ NOTE ” indicates
that additional information is
provided about the current
topics.
Intended use of this
manual
WARNING: THIS TECHNICAL
DOCUMENTATION CONTAINS
INSTRUCTIONS ON SAFETY,
INSTALLATION, OPERATION
AND MAINTENANCE. IT
MUST BE STUDIED BEFORE
WORKING WITH THE TOOL.
This manual is
intended for use by field
service, engineering,
installation, operation, and
repair personnel. Every
effort has been made to
ensure the accuracy of the
Manufacturer & Agents World Wide
information contained herein.
Blohm + Voss Oil Tools, LLC,
will not be held liable for
errors in this material, or for
consequences arising from
misuse of this material.
Anyone using service
procedures or tools, whether
or not recommended by
Blohm + Voss Oil Tools, LLC,
must be thoroughly satisfied
that neither personal safety
nor equipment safety will be
jeopardized.
Intellectual property
All rights retained.
No part of this document
may be reproduced in any
form (print, photocopy,
microfilm or any other
procedure) or be processed
using an electronic system
without written approval of
Blohm + Voss Oil Tools, LLC
All information
contained in this manual
is based upon the latest
product information available
at the time of printing.
Dependent on ongoing
technical improvements
(ISO 9001) “Blohm + Voss
Oil Tools, LLC” reserves the
right to change the design
and specifications without
announcement.
The values specified in
this manual represent the
nominal values of a unit
produced in series. Slight
deviations in the case of
the individual devices are
possible.
NOTE: In the event of
problems that cannot be
solved with the aid of this
manual, please contact
one of the addresses listed
below.
General remarks
As with all rig
equipment, the Mark
40 must be operated in
accordance with accepted
rig safety practices and
procedures. All operators
should be familiar with all
safety precautions and
recommended installation
and operating procedures,
including the information
provided in this manual and
any other safety publications
by Blohm+Voss Oil Tools,
LLC. Listed on the next page
are safety considerations
and warnings found
throughout this manual.
Limited Warranty
The warranty provided will
be void if the Mark 40 is:
1. The unit was repaired
or serviced by a
service facility which
was not authorized by
Blohm+Voss Oil Tools,
LLC.
2. The replacement parts
were not manufactured
by Blohm + Voss Oil
Tools, LLC are used.
3. The modifications were
made to the Mark 40
which was not approved
by Blohm + Voss Oil
Tools, LLC.
Premier Sea & Land Pte Ltd
54 Loyang Way
Singapore 508747
Phone: +65-6543-1433
Fax: +65-6543-1219
enquiries@mtqpremier.com.sg
HI-Energy Service
Hamriyah Free Zone
Sharjah, UAE
Phone: +971-55-2308-252
Fax: +971-4-2980-862
bdm@hi-energyservices.com
Blohm + Voss is a trademark of Blohm + Voss Shipyards GmbH®
Blohm + Voss Oil Tools GmbH
Hermann-Blohm-Straße 2
20457 Hamburg
Germany
Phone: +49-40-3119-1162
Fax: +49-40-3119-8196
oiltools@blohmvoss.com
www.blohmvoss-oiltools.com
Blohm + Voss Oil Tools, LLC
11355 FM 830
Willis, Texas 77318
United States of America
Phone: +1-936-856-4995
Fax: +1-936-856-7487
BVOT@blohmvoss.com
www.blohmvoss-oiltools.com
GENERAL INFORMATION