Installation
5
Oven Assembly
STAND ASSEMBLY
1. Place stand frame upside down on a work surĆ
face.
2. Attach one leg to each of the corner stud bolts
on the bottom of the stand top.
3. Place a lock washer and nut on each bolt and
tighten. DO NOT tighten leg bolts completely.
4. Place the shelf between the legs so that the
smooth top surface is facing the top of the
stand.
5. Align the shelf holes with the bolt holes found
near the bottom of each leg.
6. Insert a carriage bolt from the outside of the
leg, through the leg, and through the shelf corĆ
ner bracket.
7. Place a lock washer and nut on each bolt, and
tighten securely.
8. Tighten the leg frame bolts.
9. Snap the casters into the legs of the stand. SeĆ
cure by tightening the locknut.
NOTE: The locking casters must be installed
on the front of the stand.
Attach the legs to
the stand frame
Attach the shelf to the stand
See View A
View A
Attach the casters to the legs
Bottom View
Shelf
Top of
Stand
Figure 1
