8.
Troubleshooting
Often, a malfunction in the unit can be put down to a simple solution that can be
resolved without the need for a technician, therefore, eliminate the faults by following
these instructions:
8.1
If the cabinet doesn’t operate, check the following:
•
The plug is not connected to the power supply
•
The supply cord is not damaged
8.2
If the required temperature is not achieved, check the following:
•
The command switch is turned on
•
The controller has been correctly set
•
The cabinet is not defrosting/frosting
•
The evaporator is not covered with frost
•
The condenser is not blocked with dust
•
The cabinet is not located close to a heat source
•
The airflow to the condenser is not obstructed
•
The products in the cabinet are not impeding the door
•
The cabinet is not overloaded, or loaded in a way that obstructs air
circulation
8.3
If the cabinet leaks water, ensure that:
•
The evaporator tray is not damaged
•
The drains are not blocked or obstructed
•
The cabinet has been properly levelled
•
The door seal is not gathering condensation as a result of door heater
failure.
