background image

Pentland Wholesale Ltd.                                                                                     Page 

11

 of 

13

 

 

 

7.

 Maintenance 

 

 

7.1

 Periodic Cleaning 

 

For hygienic reasons and improved performance clean the cabinet at least once a 

week using warm water and a weak detergent diluted solution. 

Before cleaning, perform a manual defrost cycle (section 6.3). When complete, 

disconnect from the power supply and follow the cleaning instructions given in 

(section 4.2). 

 

7.2

 Cleaning of Condenser 

 

For improved performance, clean the condenser at least once a week. Before 

beginning, ensure the unit is disconnected from the power supply then proceed as 

follows: 

 

  Unscrew and remove protective grill 

  Remove the dust deposited on the front surface of the condenser 

using a soft brush and vacuum cleaner. When complete, replace 

grill and screw securely 

 

7.3

 Cabinet Not in Use 

 

During periods of inactivity, remove the products from the cabinet and follow 

these instructions: 

 

  Disconnect the unit from the power supply, ensuring all switches are set 

to OFF 

  Carefully clean the unit as described in (section 4.2) 

  Cover the cabinet with a cloth or cover that allows air circulation around 

the cabinet. 

 

 

 

 

Summary of Contents for BH1SS














Reviews: