USER MANUAL EN
10
Operation
Starting up a temperature regulation
Insert the plug of the connection lead into the plug
socket with protective earth contact. When the
refrigerator compartment door is opened, the
internal lighting is switched on. After the fridge has
been placed imposition, wait for 5 minutes before
electricity is supplied.
Don’t store anything until the temperature inside
the fridge become low enough.
The temperature selector knob is locked on the right
of the refrigerator compartment.
Setting 0 means
:
Off.
Clockwise rotate the knob to turn on the appliance.
Setting 1 means:
Highest temperature, warmest setting.
Setting 7 (end-stop) means:
Lowest temperature, coldest setting.
Important!
Normally we advise you select setting of 2 or 3 or 4,
if you want the temperature higher or colder please
turn the knob to warmer or colder setting
accordingly. When you turn the knob to colder
which can lead to the more energy efficiency-
otherwise it can result in
more energy-consuming
Important!
High ambient temperatures (e.g. on hot summer
days) and a cold setting (position 6 to 7) may cause
the compressor to run continuously or even non-
stop!
Reason: when the ambient temperature is high, the
compressor must run continuously to maintain the
low temperature in the appliance.
Changing the LED light!
Warning! If the LED light is damaged DO
NOT CHANGE IT BY THE USER!
Changing the LED light carry out by inexperienced
persons ay cause injury or serious malfunctioning.
It must be replaced by a qualified persons in order
to avoid hazard. Contact your local Service Force
Center for help.
Before changing LED light switch of the appliance
and unplug it, or pull the fuse or the circuit breaker.
LED light data: 220-240V, max 2W
Unplug the mains plug
To change the LED light, undo the screw
Changing the defective LED light
Put the refrigerator back to operation.
