USER MANUAL EN
12
6.Lay the upper door on a soft base with the front
facing up. Loosen the screw and remove the part,
then set them to the left and tighten.
7.Unscrew the two special flange self-- tapping
screws which are used for fi
x
ing the middle hinge
part
,
then remove the middle hinge part that
hold the lower door in place.
NOTE:
When removing the door
, watch
for
washer(s) between the lower hinge and the
bottom of the lower door that may stick to the
door
.
Do not lose
.
8.Place the lower door on a smooth surface with
its panel upwards. Loose screw
@
and part
CD
,
then Install them to the left side and tighten
securely.
9. Change screw hole covers on middle cover
plate from left to right (as shown in figure below)
10. Lay the refrigerator on soft foam packaging or
similar material. Remove both adjustable bottom
feet parts
,
and the lower hinge part by unscrewing
the special flange self-tapping screws.
11. Replace
the lower hinge part to the left side and
fixing it with the special flange self-tapping screws.
Replace the adjustable bottom feet parts to another
side and fixing it.
12.
Transfer the lower door to the property position
,
adjust the lower hinge part, and make the hinge axis
into the lower hole of the lower door
,
then tight the
bolts.
