USER MANUAL EN
15
1.
Remove all food.
2.
Remove the power plug from the mains socket.
3.
Clean and dry the interior thoroughly.
4.
Ensure that all the doors are wedged open slightly to allow air to
circulate.
Cleaning and care
For hygienic reasons the appliance (including exterior and interior accessories) should be cleaned regularly (at least every
two months)
.
Caution!
The appliance must not be connected to the mains during cleaning as there is a danger of electrical shock
.
Danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains socket.
Exterior cleaning
-Wipe the control panel with a clean, soft cloth
.
-Spray water onto the cleaning cloth instead of spraying directly on the surface of the appliance. This helps ensure an even
distribution of moisture to the surface
.
-Clean the doors
,
handles and cabinet surfaces with a mild detergent and then wiped dry with a soft cloth
.
Caution!
-Don't use sharp objects as they are likely to scratch the surface
.
-Don't use Thinner
,
Car detergent
,
Clorox
,
ethereal oil
,
abrasive cleansers or organic solvent such as Benzene for cleaning.
They may damage the surface of the appliance and may cause fire.
Interior cleaning
You should clean the appliance interior regularly
.
Wipe the inside of the fridge freezer with a weak solution of bicarbonate
of soda
,
and then rinse with warm water using a wrung-out sponge or cloth
.
Wipe completely dry before replacing the
shelves and baskets
.
Thoroughly dry all surfaces and removable parts
.
Although this appliance automatically defrosts
,
a layer of frost may occur on the freezer compartment's interior frequently
or kept open too long
.
If the frost is too thick
,
choose a time when the supply of food stocks are low and proceed as follows:
1.
Remove existing food and accessories baskets
,
unplug the appliance from the mains power and leave the doors open.
Ventilate the room thoroughly to accelerate the thawing process
2.
When defrosting your freezer as described above your freezer as described above.
Caution!
Don't use sharp objects to
remove frost from the freezer compartment. Only after the interior is completely dry should the appliance be switched
back on and plugged back into the mains socket.
Door seals cleaning
Take care to keep door seals clean
.
Sticky food and drinks can cause seals to stick to the cabinet and tear when you open
the door
.
Wash seal with a mild detergent and warm water
.
Rinse and dry it thoroughly after cleaning
.
Caution!
Only after the door seals are completely dry should the appliance be powered on
.
Replacing the LED light:
Warning
:
The LED light should be replaced by a competent person! If the LED light is damaged
,
contact the customer helpline for assistance
.
Defrosting Why defrosting
Water contained in food or getting into air inside the fridge be opening doors may form a frost layer inside. It will weaken
the refrigeration when the frost is thick
.
While it is more than 10mm thick
,
you should defrost.
Defrosting in fresh food storage compartment
Is automatically controlled by switching
the temperature regulator on or off so that there is no need of operation of
defrosting. Water from defrosting will be drained into an drip tray through a drain pipe at the back of the fridge
automatically
.
Defrosting in frozen-food compartment
-Defrosting in freezer chamber is operated manually. Before defrosting
,
take the food out.
