5
106431 03/15
Operating Instruction
Introduction
2.7 Maintenance work, repairing
faults, disposal
•
Adhere to the setting, maintenance and
inspection work and deadlines specified in
the operating instructions, including the
replacement of parts and equipment!
This work must only be carried out by
qualified personnel.
•
Always tighten screw connections that
were loosened during maintenance and
servicing work!
•
Make sure that operating materials, fuels
and spare parts are disposed of safely and
in an environmentally friendly manner!
2.8 Special dangers
•
Separate the charging device from the
Master Wheel 50 and the electric mains
before the start of repair work.
•
Remove voltage from the appliance at all
times before the start of repair work; to do
this, remove the plug from the battery.
•
Do not confuse the electrical connections!
Oils, greases and other chemical sub-
stances
Observe the safety instructions that apply to
the product when handling oils, greases and
other chemical substances!
Applied safety standards
DIN EN 292 / DIN EN 294 / EN 349 /
EN 418 / EN 811 / EN 50099 /EN 1494
