Blitz Master Wheel 50 Operating Instruction Download Page 3

3

106431  03/15

Operating Instruction

Introduction

2 Introduction

Blitz lifting tools are the result of many years 

of experience. The high quality standards 
and the well-considered concept guarantee 

reliability, durability and economic operations. 
Please read these operating instructions care-

fully and adhere at all times to the contents in 

order to avoid unnecessary damage and risks. 

2.1  Areas of operation

The Master Wheel 50 is exclusively designed 

to lift, lower and transport car tyres in car 
garages. In this, the load must not exceed the 
load bearing capacity of the appliance. The 

appliance must not be used in areas that are 
exposed to the risk of explosion. 

Warning

Any other use, or any use that exceeds 

the described scope, is deemed to be 
improper. This applies in particular to 
climbing on to the appliance, driving 

with the appliance or using it as a sup-
port stand.

BlitzRotary GmbH will not be made liable for 

damage that results from improper use. The 
operator carries the exclusive risk for this.

The following is also deemed necessary for 
proper use 

•  Adherence to all instructions in these ope-

rating instructions 

•  Adherence to inspection and maintenance 

work and the specified tests.

2.2  Warranty and liability 

Our “General terms of sales and supply” 

apply. The operator has been in possession 
thereof since the conclusion of the contract. 

Warranty and liability claims for personal 
and material damage are excluded if they are 
based on one or more of the following circum-

stances:

• 

Improper use.

• 

Improper assembly, commissioning, op-
eration and maintenance of the appliance.

• 

Operation of the Master Wheel 50 while 
the safety installations are defect or 

improperly installed or non-functioning 

safety and protective installations.

• 

Failure to adhere to the instructions in the 

operating instructions concerning trans-
port, storage, assembly, operation and 
maintenance.

• 

Customer modifications to the Master 
Wheel 50.

• 

Substandard monitoring of parts that are 
subject to wear.

• 

Improperly implemented repairs. 

• 

Catastrophes due to the influence of for-

eign bodies or acts of god.

We will not accept customer services claims 
or the costs of return transport in the event of 
there being a failure to adhere to these listed 
points. Therefore, please contact the manu-

facturing plant before organising any return 
transport. 

2.3  Safety / accident prevention

The Master Wheel 50 must only be operated 
by qualified persons. Unauthorised persons 

are prohibited from operating the appliance!

Summary of Contents for Master Wheel 50



















Reviews: