
15
106431 03/15
Operating Instruction
Appendix
11.2 Safety examination
Master Wheel 50
Serial No.
Year of construction
Test steps for the safety examination
• Nameplate attached and labelling in place
• Warning signs in place (load bearing capacity and warning instructions)
• Check supporting construction for deformation and cracks
• Check that all supporting screws are tight
• Check state of the electrical wires
• Check charger (cable and plug)
• Check function of the emergency off switch
• Function test with load
First safety examination carried out by manufacturer, no faults identified
BlitzRotary GmbH
Regular safety examination
Date
Signature/Ex-
pert
No faults
Faults
Additional ex-
amination re-
quired