69
If you select "
Adjust optimum
",
you can defi ne the relation-
ship of a time-optimised to
distance-optimised route (see
below).
Note:
The route types "
Fast
", "
Short
"
and "
Optimum
" are mutually
exclusive. If one of these route
types is activated, the other two
are automatically deactivated.
Defi ning the type of road
To disable certain types of roads
from the route calculation:
To defi ne the route type:
In the "
Route options
" menu, mark
and confi rm the "
Enable
" menu
item.
The "
Enable
" menu appears.
Mark and confi rm the desired
type of road in the "
Enable
"
menu.
You can block the selected type
of road for the route calculation
(symbol crossed out in red) or
release it (symbol not crossed
out).
•
➜
➜
"
Motorway
": Here you can de-
fi ne whether motorways should
be used or avoided during des-
tination guidance.
"
Toll
": Here you can allow or
disallow toll roads for the des-
tination guidance.
"
Ferry
": Here you can allow or
disallow ferries.
"
Seasonal
": Here you can allow
or disallow roads which are
blocked in certain seasons,
such as Alpine passes.
"
Tunnel
": Here you can allow or
disallow tunnels.
Note:
If you exclude a certain type of
road from the route calculation
which would result in long de-
tours, this setting is ignored dur-
ing the route calculation.
Defi ning an optimum route
You can defi ne the optimum route
yourself by defi ning the relationship
of a time-optimised to distance-op-
timised route. The factory setting
is 60 (fast) to 40 (short).
To defi ne the optimum route:
In the "
Route options
" menu, mark
and confi rm the "
Adjust optimum
"
menu item.
The relationship of a time-op-
timised to distance-optimised
route is illustrated by a bar.
•
•
•
•
•
➜
Enable
Seasonal
Tunnel
Motorway
Ferry
Toll
Enable
Seasonal
Tunnel
Motorway
Ferry
Toll
Operating the navigation system
ROME56E_eng.indd 69
ROME56E_eng.indd 69
23.08.2006 15:05:18 Uhr
23.08.2006 15:05:18 Uhr
