9
Pull the control panel straight
out of its hinges.
To attach the control panel:
Push the control panel into its
hinges from the front.
The control panel engages in the
hinges.
Fold up the control panel.
The control panel engages. The
device can now be switched on.
Switching the device on and
off
To switch on the device:
Press the On/Off button
3
.
The device plays the previously
active audio source at the previ-
ously selected volume.
➜
➜
➜
➜
Notes:
You can limit the power-on vol-
ume to a maximum value (see
p. 18).
If you switch on the device
without fi rst switching on the
vehicle ignition, the device au-
tomatically switches off after
one hour to save the vehicle
battery.
To switch off the device:
Hold the On/Off button
3
pressed until the display disap-
pears.
The device remains in standby
mode for 30 minutes before com-
pletely switching itself off.
Note:
The device is automatically
switched off as soon as you
switch of the vehicle ignition. If
you switch on the ignition again,
it also automatically switches on
the device again.
Entering the code number
The code number is used for theft
protection. You must enter it if the
device was disconnected from the
battery power, e.g. after a repair
of the vehicle. The code number is
printed on the device card.
Note:
Memorise the code number or
take it with you before you use
the vehicle for a longer trip.
•
•
➜
The basic functions
ROME56E_eng.indd 9
ROME56E_eng.indd 9
23.08.2006 15:04:52 Uhr
23.08.2006 15:04:52 Uhr
