121
Additional settings
EN
GLISH
Additional settings
You can perform additional settings:
Confi guring the preamplifi er output for the
subwoofer
Activating/deactivating demo mode
Displaying the version number of device
components
Updating the device software
Confi guring the preamplifi er output
for the subwoofer (SUBOUT )
If you want to use an additional subwoofer via an
external amplifi er, it can be adjusted to the oth-
er loudspeakers. You can adjust the level of the
Subout preamplifi er output for a selected cut-off
frequency .
You adjust the following settings in the Enhanced
menu for this purpose:
"GAIN " (level )
"FREQ " (cut-off frequency)
Press the
AUDIO
button
<
.
Press the rocker switch or
@
repeatedly until the "EN AUDIO" menu item
is selected.
Press the
OK
button
:
to call up the menu
item.
The Enhanced menu appears.
In the Enhanced menu, press the rocker
switch or
@
repeatedly until the
"SUBOUT" menu item is selected.
Press the
OK
button
:
to call up the menu
item.
Press the rocker switch or
@
to
change between these menu items:
"GAIN" (from 0 to +7)
"FREQ" (80 Hz, 120 Hz or 160 Hz)
Press the rocker switch or
@
to change
the setting.
•
•
•
•
•
•
쏅
쏅
쏅
쏅
쏅
쏅
•
•
쏅
After you performed the settings for all menu
items,
Press the
OK
button
:
to select a different
function, or press the
DIS•ESC
button
;
to
exit the menu.
Activating/deactivating demo mode
The Demo mode uses animations to show you
which functions the device offers.
To switch the demo mode on or off,
switch off the device.
Simultaneously press the
MENU
button
9
and the
0
button of the alphanumeric
keys
A
while switching on the device.
The device switches on with activated or deacti-
vated demo mode. By pressing any button, the
demo mode is interrupted and you can operate
the device.
Displaying version numbers
You can display the version numbers of the dif-
ferent device components.
Switch off the device.
Simultaneously press the
MENU
button
9
and the
#
button of the alphanumeric
keys
A
while switching on the device.
The version display with information about the
software appears.
Press the rocker switch or
@
to
change between device components.
To exit the version display,
use the rocker switch or
@
to select
the "EXIT" menu item.
press the
OK
button
:
.
The display of the audio source previously lis-
tened to is displayed.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
02_NJerseyMP68_gb.indd 121
02_NJerseyMP68_gb.indd 121
29.10.2008 11:00:05 Uhr
29.10.2008 11:00:05 Uhr
