117
User settings
EN
GLISH
Use the rocker switch or
@
to select
the setting "12 HR – AM", "12 HR – PM" or
"24 HR MODE".
Press the rocker switch
@
to switch on
the selected setting.
Press the
OK
button
:
to select a different
function, or press the
DIS•ESC
button
;
to
exit the menu.
Setting the time (CLK SET)
In the System menu, press the rocker switch
or
@
repeatedly until the "CLK SET"
menu item is selected.
Press the
OK
button
:
to call up the menu
item.
The time is displayed.
Select the hours or minutes with the rocker
switch or
@
.
Enter the desired digit by pressing the
corresponding button of the keys
A
.
After entering the complete time,
press the
OK
button
:
to store the time
entered.
Note:
To fi nish the entry without changing the
time, press the
DIS
•
ESC
button
;
.
Changing volume presettings
The following presettings can be changed in the
System menu:
Power-on volume (ON VOL / LAST VOL)
Volume presettings of traffi c announcement
(TA VOL), telephone/navigation announce-
ment (TEL VOL) and volume reduction
(MUTE VOL)
Signal tone (BEEP ON)
Speed-dependent volume increase
(AUTO SND)
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
•
•
•
•
Adjusting power-on volume (ON VOL /LAST
VOL )
To adjust the power-on volume,
in the System menu, press the rocker switch
or
@
repeatedly until the "ON VOL"
menu item is selected.
Press the
OK
button
:
to call up the menu
item.
The current power-on volume is displayed.
Set the power-on volume with the rocker
switch or
@
.
Press the
OK
button
:
to select a different
function, or press the
DIS•ESC
button
;
to
exit the menu.
You can also select the setting "LAST VOL". This
sets the volume at power-on to the volume at the
last switch-off:
In the System menu, press the rocker switch
or
@
repeatedly until the "LAST VOL"
menu item is selected.
Press the
OK
button
:
to call up the menu
item.
Switch between the settings with the rocker
switch or
@
.
"LAST VOL"
: On.
"LAST VOL"
: Off.
Press the
OK
button
:
to select a different
function, or press the
DIS•ESC
button
;
to
exit the menu.
Note:
If "LAST VOL" is switched off, the device is
switched on with the volume adjusted under
"ON VOL".
Changing volume presettings for TA, TEL and
MUTE
If the device switches a traffi c announcement,
phone call or navigation announcement, it
always starts with the volume preset here.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
•
•
쏅
02_NJerseyMP68_gb.indd 117
02_NJerseyMP68_gb.indd 117
29.10.2008 11:00:03 Uhr
29.10.2008 11:00:03 Uhr
