www.blaubergventilatoren.de
vento eco
14
5. Parameter setting in the engineering menu.
filter servicing timer
The serviced hour number is displayed. To reset the filter servicing timer press and hold the
button for 4-5 seconds.
configuration
Parameter setting using the
or
buttons.
One ventilator 1.
Two ventilators 2.
deactivation mode
Parameter setting using the
or
buttons.
ON: user can turn the ventilator off.
OFF: user cannot turn the ventilator completely off, the ventilator will run at the permanent low
speed.
speed setting
Parameter setting using the
or
buttons.
Set the value 5.
6. Return to user menu.
Press several times the
button till the main window of the user menu is displayed.
Automatic reset to the main window is performed 20 seconds after the button on the control
panel was pressed last time.
7. Alarm indicator.
indicator is displayed during motor alarm.
8. Ventilator turning off.
To turn the ventilator off go to the main window and press the
button.
If the timer was on, the ventilator turns off only after complete countdown of the set time.
To set the ventilator operation in the off status start from the point 2.
