www.blaubergventilatoren.de
vento eco
8
INSTALLATION OF WALL-MOUNTED CONTROL PANEL
Installation of the control panel with LCD display
1.
Prepare a wall opening, lay
required wires and cables to the
installation place of the control
panel and install the mounting
box for wall flush mounting. The
mounting box is included in the
delivery set.
2.
Unfasten gently the latches
on the lower part of the control
panel using a screwdriver
and disconnect the front part
from the back side. Do not
disconnect the connectors on
the circuit boards in the casing.
3.
Connect the wires to the
terminal blocks on the back
side of the control panel in
compliance with external
wiring diagrams. Fix the back
side of the control panel on
the mounting box through the
fastening holes with supplied
screws.
4.
Press the control panel to
the frame to click to fix it with
latches.
MAKE SURE THAT THE CONTROL PANEL IS NOT MANAGED.
DO NOT USE A DAMAGED CONTROL PANEL! DO NOT INSTALL THE CONTROL PANEL
ON AN UNEVEN SURFACE! WHEN TIGHTENING THE SCREWS DO NOT APPLY EXCESSIVE
FORCES TO AVOID THE UNIT DEFORMATION.
MOUNTING AND SET-UP
READ THE USER'S MANUAL BEFORE INSTALLING THE UNIT.
