Blastrac BS 180, Instruction Manual

Page: 15 / 60

Page 14
BS180 GENERAL OPERATION
MAINTENANCE (continued)
13. Hydraulic Fluid: Keep clean and at a proper level. See page 5 and 26.
14. Keep wheels free from debris. See page 25.
INSPECTION PROCEDURE HYDRAULIC
PREVENTIVE MAINTENANCE CHECKLIST
By following this preventive maintenance checklist, you can maintain your equipment
hose efficiently, safely and with very little effort. Each step is covered in detail in the
following section.
•
Always turn off and unplug electrical source before servicing.
•
Place equipment and components in a safe or neutral position.
•
Remove access panels (if any) and inspect hose and fittings for damage or leaks.
•
Repair or replace as needed.
•
Inspect all hydraulic components.
•
Reinstall the access panels.
•
Turn power back on.
•
Be aware of your equipment, always look and listen for anything unusual.
WARNING: Do not lock wheel drive into a permanent on position. If operator would lose control or
be disabled, machine continues to operate.