Blastrac BS 180, Instruction Manual

Page: 14 / 60

Page 13
BS180 GENERAL OPERATION
MACHINE START UP PROCEDURE
TO RUN MACHINE:
1. Machine MUST be off before plugging machine into
power source.
2. Plug machine into outlet.
3. Turn speed control to slowest position.
4. Turn machine on.
5. Engage forward or reverse switch.
6. Increase speed control to desired speed.
MAINTENANCE
1. Always wear eye protection.
2. Keep flammable and fragile objects away
from this tool.
3. Always check nuts and bolts to make sure
they are tight.
4. Always use the tool with proper voltage
specified in the machine’s name plate.
5. Always keep guards in place.
6. Do not operate around water or wet conditions
without use of GFI on cord.
7. Use properly grounded cord and receptacle.
8. Unplug from power before servicing.
9. Use 12 gauge or heavier wire cord, not
exceeding 50 feet in length.
10. Do not force machine.
11. Do not alter machine.
12. Pressure valve has been factory set and
should NOT be tampered with.
A well -maintained machine is a productive machine. If not properly maintained, it could be unsafe
and could break down. A scheduled maintenance program should insure a long system life and a safe
work environment.
Reverse
Switch
Forward
Switch
Speed
Control
On/Off
Switch