18
Further is advised:
Store the cleaned and dry machine in a dry and humid free room. Protect the electrical motors from moisture,
heat, dust and shocks.
All repair work must to be done by qualified Blastrac personnel, this to guarantee a safe and reliable machine.
Any guarantee on the machine is expired when:
Non original Blastrac parts have been used
Repair work is not done by qualified Blastrac personnel
Changes, add on’s or conversions are undertaken without written permission of Blastrac BV
Work only with original Blastrac parts.
Dust in the electrical box can damage the electrical components; due to this the electrical box has to be
cleaned every day from inside and outside.
Clean the box with compressed air and a vacuum cleaner.
Check regularly to see if the diamond wings are in good condition. Replace immediately when these are
damaged or worn out.
Check weekly if the diamond plates don’t have too much space in the buffers. If the diamond plate has too
much space, tighten the bolts (1) or replace the buffers (2). There is also the possibility to add double buffers
to have a more rigid grinding head. Check service manual for more information.
Prevent premature wear by keeping the machine as dust free as possible, for these reasons clean the machine
regularly with a vacuum cleaner.
Clean the machine every day with air and non-aggressive materials.
Never use a high pressure water cleaner to clean the machine.
Old equipment contains valuable materials which are valuable for re-processing.
The machine parts must
not be thrown
away in the normal household waste,
but should be disposed of at a suitable proper
collection system, e. g. via your communal disposal location. This way the materials can be re-used in an
environmentally responsible manner.
Despite the fact that this guide is made with care, Blastrac takes no liability for errors in the manual and the possible
consequences. We are naturally very interested in your findings and additions.
No part of this publication may be reproduced and / or published in print, photocopy, or other
form without prior permission by Blastrac.
