11
4. Initial operation
Before using the machine it is important to inspect the machine.
It is not permitted to use the machine if the safety is not checked according to the checkpoints described
below.
Before switching on the machine make sure that no-one can be endangered when the machine starts up!
4.1
Checkpoints power supply
Use only extension cables for extending the main cable that are sized and marked in accordance with
the overall power consumption of the machine.
Electrical cables must be fully unwind of them reels.
No damage is permitted for electrical cables.
Use an electrical power supply connection with earth connecting.
Make sure the power supply is in accordance with the machine specifications.
The main power switch on the machine must be in the “Off” position before connecting to the power
supply. (Only if there is a main switch present on the electrobox.)
If the machine is to be operated using power from a generator, the generator must be operated in
accordance with the current legal regulations and directives in force. (this applies to the protective
earth conductor in particular) in order to ensure that all safety devices are functioning and to eliminate
possible damage to electrical components.
4.2
Checkpoints of machine
Safety functions and operating functions must work correct.
Check the diamond wings for damages and/or wear.
Check all screws and other fasteners for tightness. No loose bolts and/or nuts are permitted.
Check the electrical components, cables and connections for wear and/or damages.
Dust hose connection must be reliable: use hose clamps and industrial tape.
Dust hoses must be undamaged and free of obstructions
Make sure that the dust bin / bigbag is empty and connected properly.
4.3
Manual moving of the machine
To move the machine press down the handgrips of the machine until the front part rises from the ground.
It can now be pushed around on its wheels.
The machine should only be moved around when the dust hose and power supply cable are disconnected.
WARNING!
Always make sure all rotating parts have come to a complete standstill before moving around the
machine.
Be careful! Make sure nobodies feet get under the wheels. Wear appropriate safety shoes when you drive the
machine to or from the work area.
DIAMAG
When using DIAMAG adapter plates, you can replace
the diamond wings without using any tools!
Because of the specially designed heat resistant magnets
and fixation pins, the diamond tools are fixed onto the
plate, but can still very simply be replaced by hand.
Contact your Blastrac distributor for more information
or check
WWW.DIAMAG.EU
