8
QAMOS-CT •
Part No. 5120.01
•
DVB-C /-T /-T2 Transmodulator
7.2 Setting of individual parameters
Here you can set certain parameters of the module or perform configurations. The various setting menus can be
selected in the navigation tree on the left side. The setting is supported by an online help. If you mouse over a parameter
explanations of this parameter are displayed in an orange colored text box in the lower part of the screen. By settings
in the “
Setup
“ menu (
»chapter 7.2.7
) can be selected so that the help is displayed in the status bar of your browser.
Therefor setting changes in the browser options could be necessary.
By default status information for the module is displayed below the navigation tree. An option to move it on the right
side instead is available (
GUI
»chapter 7.2.7
).
All eight channels are listed individually. A green LED symbol in front of
“channel 1 ... 8“
means that input and output
are synchronized and that the channel operates without error. An orange colored symbol indicates that an error has
occurred. An overview of the status of various parameters of the channel is obtained by clicking the corresponding
channel. A
transparent
LED symbol means that the channel is not configured or the RF output is turned off.
The “
Power
“ LED indicates the connection status between the network interface and the module. The “
System
“ LED
gives an overview about the status of the system parameters.
If you
click on a channel
an overview window is displayed. The pop-up window closes after 20 seconds or by cklicking
in its lower part.
In all menus it‘s possible to switch the language between German and English on the top right.
01)
